Chainsaw Blunders Will Kill You!

There are too many mistakes in this stump; one is wasteful, two are potentially fatal. The first one is the high stump that the cutter made. This was a white oak, and was included in a sale of high quality trees, so the stump should have been just off the ground. Cutting the stump above his waist was just plain stupid if the cutter was trying to make money on this tree. Cutting high not only throws away high value wood, it pushes the bucking points of the segments into lower grade logs, and devalues the entire tree. But that's just money.

The front cut defies belief. The purpose of the front cut (face cut) is to aim the tree, because it wants to fall at a right angle to this cut. Wood that is left in front of the face interferes with the forward and downward travel of the tree. The two cuts that should make this open face must meet! Wood in this face interferes with the rotation of the tree to the ground. In olden days the front cut was opened up to 45°, because that was what you could do with an axe. The tree would close the opening halfway to the ground, breaking the hinge. Nowadays, because we use chainsaws, we open that cut up to 70° or 90°. The tree will rotate all the way to the ground before the hinge breaks. There is no excuse for making only a single cut on the front side of the hinge. When the tree begins to rotate, it will hit that wood and split lengthwise, causing extreme danger to the cutter as the tree elevates on a springpole.

Now, the back cut. Way back in B. C. (Before Chainsaws) we cut the front opening to aim the tree and to allow the tree to turn down on the hinge. Old timers call the hinge Holding Wood. Nowadays, the holding wood is the backstrap that you cut last; so you have to be careful with your terms. The tree was felled by cutting from the backside with a crosscut saw. At some point, if the tree has forward weight, the tree tips on the hinge. If the tree has excessive forward weight it will tip too soon, and split lengthwise instead of bending the hinge, elevating itself on a springpole called a barber chair. Chainsaws can bore through a tree, making a hinge of proper thickness in order to prevent springpoles, while you leave a backstrap that holds the tree in place on its hinge. The cutter who made this stump obviously did not possess the skills to do that, and he probably did not understand the importance of a proper setup on his stump.

I think the cutter survived, because the ruined tree was cut up in pieces and left around the stump. Learn how to use your chainsaw safely and effectively. Now, go and sin no more.

PS: This is a repost from June 2015.  I have been thinking about this subject, and I have encountered only one person smashed by a barberchair incident.  Another person, whom is still living and cutting trees got busted up by one.  I know four people who have been smashed up (and lived) by trees they match-cut.  They cut from one side, then the other, severing the tree with no hinge to guide it.  The broken bone and body count in my personal experience is higher from match cutting than by creating a barber chair, but both are extremely dangerous, bad ideas.

Weekend Steam: If It Says ACME, It Has To Be Good!

The brief writeup with this video says that it hadn't run in more than fifty years.  They took it apart, oiled it, put it back together, and it ran.  Remarkable!


Thank You, Merle, for spotting!

I Found Work

We had a storm all the way across Southern Illinois tonight, (Th June 28) and boy oh boy did it make the trees whip.  I checked the Bradford pears when the wind let up, and of course they were broken up. Don't plant ornamental pears.  Nothing but trouble.

The good news is that these things make pretty good firewood, and it will dry just fine by the time cold weather arrives.

Pears are limby, and sort of disagreeable to work on.  They are not as bad as a shingle oak to work up.

Site Indicator: There's Crawdad Holes, and There's Big Crawdad Holes

Foresters are looking up, down, and all around all the time when they are walking in the woods.  As the years roll by you pick up clues that help you understand the sites you are crossing on your recons and cruises.  I worked most of my forester years in the Clay Pan Region of Southern Illinois. The soils here are not as productive as the prairie soils north of this region, but if you understand what plants like which sites, you can use that knowledge to great advantage.  What does a massive crawdad hole mean to you?

This really big crawdad hole on a creek bottom site tells you that there is no restrictive layer in this soil; something that the ancient soils of the Clay Pan Region typically have. No restrictive layer in deep soil in a creek bottom is a good thing if you want to grow high quality hardwoods.

The two most common soil types you find in unrestricted creek bottoms are Belknap and Sharon Silt Loam.  Both are great sites for growing black walnut.  Sharon is a bit more productive, and if you don't have a soil map, you can easily tell whether you are on a Sharon site by knowing Spicebush.  It is common on Sharon, and does not seem to grow on Belknap.  These creek bottoms will have bluffs on either side, of course.  Those bluffs will have soil types such as Hickory, which also do not have a restrictive layer, due to the steepness of the soil, which inhibited fragipan development.  The bluffs are ideal sites for groundhog dens because of this.  It just so happens that Spicebush is a great seasoning to add to a groundhog in your roaster.  Cut Spicebush twigs in segments and poke them in all over your groundhog after you have parboiled it, and before you roast it with potatoes, carrots, and onions.

We were talking about walnut.  Here is a nice, 19 inch Diameter at Breast Height black walnut on a 3382 Belknap site. It was growing well, and will be worth good money when it is harvested.

One of the ways you identify black walnut is by the chocolate color of the bark when you peel off the outer, oxidized layer.

You can see the 3382 Belknap soil type between the steep bluffs on either side on this soil map. The walnut featured above was on this site.

Ruger's Auction To Benefit The Light Foundation

This week Ruger is offering a .357 Flattop Blackhawk with collector interest.  This is one that was made to commemorate the 50th year of the Blackhawk, and it is made in Flattop configuration on the smaller frame of the original Blackhawks.  The price is not outlandish yet for a collector item, and this baby is engraved!  Go to Ruger's Auction Page and click More Images to see all of the photos.  This fine single action revolver sells mid-day, June 27, 2018, so CLICK HERE to read all about it and to place your bid.  $1026.01  Wow!

Tuesday Torque: A Few Nicely Restored Economy Engines At Evansville

Evansville is home to Hercules and Economy, so you always expect to see those brands on display at the SIAM (Southern Indiana Antique Machinery) Show.   Next year will be a great one because it marks 105 years since production started.  Here are a few that were next to Gary and me when we set up.

Just Grab A Task And Go!

Back To The Old Grind!

Danger Lurks

Every time you go in the woods you need to remind yourself to watch where you put your feet.  That's even more important during the growing season when greenery may hide things like this old bell-shaped cistern.  If you fall in this thing, you are not climbing out!  It had boards over the opening, but they have rotted away, making it a deadly trap for unsuspecting wildlife and humans.  Tell a landowner they need to fill it in and seal it and they typically respond with, "Don't turn me in!"  I always carried a whistle, just in case I needed a noisemaker to attract rescuers if I fell down one of these things, but it seemed a joke more than a comfort.

I knew  of a deep hand dug well in an extremely remote area, and on a visit to the property I noted that it had been filled.  I thanked the landowner when I called him to report on my visit and he said, "Huh?"  That's a mystery.... Be careful out there.

Weekend Steam: It's Gritty, It's Real: Sandaoling Coal Mine Engines

Merle keeps finding 'em, and we keep posting them!  Thanks, Merle!  This is not exactly a tourist destination, but it should be.

One Of Our Special Treats

We made a trip back to Eastern Kentucky in the Fall of '84 and brought back some tiny sourwood seedlings from a strip mine bench. They give us a good show every June with their flowers, and again in the fall when the leaves turn red.

It's a joy and a reminder of our former lives.